CHLORINE F & T POCKET COLORIME

Calculate Shipping

Small in size, big on precision and easy operation

The new Pocket Colorimeter™ II Filter Photometer is a true go-anywhere instrument. It's lightweight and battery operated, suitable for extended field work or quick, on-the-spot process monitoring. The instrument has two channels in which measurements can be made. Each channel will accept a user-defined calibration curve. Up to 10 standards can be used to determine the calibration. The curve is generated by a point-to-point straight line segment between each standard used. Linear and non-linear positive or negative slope calibrations can be performed. A calibration curve may also be manually entered from the keypad if a previously determined curve has been made on the Colorimeter. At least two data pairs (concentration and absorbance) are required.

*This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.

Single Parameter go anywhere portable photometer
USEPA accepted method for drinking water analyses (free and total chlorine) and wastewater analyses (total chlorine only)
Factory-Programmed
Waterproof, Lightweight, Rugged
Backlit Display, Data Logging, Recall

Two Ranges: LR-0.02 to 2.00 mg/L and HR-0.1 to 8.0 mg/L as Cl2. Reagents included: 100 tests each for low range, or, 50 tests each for high range. Each Pocket Colorimeter II Instrument comes complete as a ready-to-use kit that includes a reagent set (pre-measured unit dose reagents), sturdy custom carrying case, and manual.

Absorbance: 0 to 2.5 Abs

Battery Life: 2000 tests
* backlight will decrease battery life

Battery Requirements: 4, AAA size alkali cells

Compliance: European CE mark

Data Logger: 10 measured values + time

Detector: Silicon detector

Dimensions Metric (H x W X D): 155 mm x 61 mm x 35 mm

Display: LCD, backlit

Enclosure Rating: IP67 (excludes battery compartment)

EPA compliant: Yes

Footnote: *mg/L unless otherwise noted, ppb = µg/L, ppm = mg/L.; gpg = grains per gallon; 1 gpg = 17.1 mg/L or 17.1 ppm. 1EPA-accepted for wastewater. Check with your regulatory agency.

Includes: PC II, sample cells, manual, carry case. Reagents included: 100 tests each for low range or 50 tests each for high range.

Instrument: Kit includes PC II

Method: 8021 (F),
8167 (T)

Method Name: Colorimeter/DPD

Number of tests: 50-100

Operating Humidity: max. 90 % relative humidity (non-condensing)

Operating Mode: Hach vial tests for water analysis

Operating Temperature: 10 to 40 °C

Parameter: Chlorine, low range - as free & total Cl2

Photometric Measuring Range: 0 to 2 Abs

Power supply: 4, AAA size alkaline cells

Range: to F&T Cl2

Range 2: 0.1 to 8.0 mg/L CI₂

Sample Cell Compatibility: 1 inch round / 13 mm round /1cm square (with optional adapter)

Sample Cell Path Length: 1 inch round (25,4 mm) and 10mm square with adapter

Smallest Increment Steps: 0.01
0.1

Spectral Bandwidth: 15 nm filter bandwidth

Supported Chemistry: HACH tests and HACH LANGE cuvette tests

User Interface: Numeric

User Interface Languages: Numeric

User Programs: 1 Custom programming

Wavelength Accuracy: Fixed wavelength ± 2 nm varies with model

Wavelength Range: varies with model

Wavelength Selection: Fixed wavelength

Weight: 0.51 lbs. (0.23 kg)

(HAC58700-00)

SKU	HAC58700-00
Brand	HACH®
Shipping Weight	1.6000kg
Shipping Width	0.200m
Shipping Height	0.200m
Shipping Length	0.150m
Unit Of Measure	each